JebChem 3333 – Polyether-Modified Polydimethylsiloxane
JebChem 3333
JebChem 3333 is a polyether-modified polysiloxane for solvent-free, solvent-borne and aqueous coating systems, printing inks and adhesive systems.
Physical Characteristics *
| Appearance | Yellow viscous solution |
| Density | 1.06 g/cm³ |
| Active Content | 100% |
| Solvent | None |
* The values indicated in this publication describe typical properties and do not constitute specification limits.
Benefits
Improves dirt resistance in water-based coating
Strong reduction of surface tension in coatings and inks, therefore improving substrate wetting
Excellent compatibility with most solvent-based and water-based coatings, inks and adhesives
Does not effect re-coatability
Average COF value of Slip Agents
This table shows the average COF (coefficient of friction) value of JebChem slip agent additive and competitors in the market. JebChem 3333 provides good performance compared to the competitors. It has a lower COF value than the competitors.
LOWER COF value, BETTER slip property
Develop super slip w/b roof tile paint for Water Base Coating
The performance evaluation of Dirt Pick Up with different slip agents
The performance evaluation of dirt pick-up ability in different slip additives. As test result, observed that JebChem 3333 has very good enhancing ability of dirt pick-up, less pigment is stuck on sample panel compared to B 378.
The performance evaluation of water repellency in different Slip Agents
The performance evaluation of water repellent in different slip additives. As test result observed, JebChem 3333 can enhance water repellency in water-base roofing tile paint – Less water is stuck on sample panel than pm B 378.
Don’t just take our word for it.
We have free samples available for your team. Click below to find out more about the products used in this project.
Related Articles
JebChem 1900 – Silicon Antifoam Agent
JebChem 1900 is a highly efficient silicon anti-foam agent for solvent-based systems, specialised for high-build epoxy, PU, UV, and pigmented coatings.
JebChem 3378 – Polyether Modified Polysiloxane
JebChem 3378 is a polyether modified polysiloxane substrate-wetter with excellent slip properties, suitable for most solvent-based, water-based coatings and solvent-free systems.
JebChem 7602 – Silica Matting Agent
JebChem 7602 is a silica matting agent for water-based overprint varnish (OPV). This product is used in paint and printing inks to create a non-glossy surface with a smooth touch and high transparency.
