JebChem 2040 – Antifoam for Epoxy Flooring
JebChem 2040
JebChem 2040 s a saturated aliphatic hydrocarbon silicone-free anti-foam and is designed for paint and coating applications. Has good chemical stability (heat, oxidation, etc.) and is soluble in various non-polar solvents (e.g. mineral oil, toluene, alkane).
Physical Characteristics *
Appearance | Clear and bright |
Density | 0.838 g/cm³ |
Active Content | ≥99% |
Kinematic Viscosity | 400 mm²/s (40˚C) |
* The values indicated in this publication describe typical properties and do not constitute specification limits.
Benefits
Excellent anti-foam agent for solvent-free systems on epoxy coating
Recommended Dosage
0.01-1.0 % additive (as supplied) based upon total formulation
Typical Application
2 Pack Epoxy (solvent-free)
Table 1 – Preparation of Part A
Table 2 – Ingredients of Part B
Shaking Test
Weigh material into glass container then mix by high speed shaker for 5 minutes (see Table 1) to determine the de-foaming efficiency.
Casting Test
Mix Part A : Part B as ratio 2:1 then mix with high speed shaker for 1 minute. Cast epoxy self-levelling mixture in polypropylene mold, control dry thickness to about 3 millimeters. Leave the epoxy cure for 12hrs then determine de-foaming efficiency of the casting.
Results
Conclusion
The test result based on this experiment – just 0.01% Antifoam JebChem 2040 in epoxy flooring shows EXCELLENT anti-foam performance and provides a smooth finish.
Don’t just take our word for it.
We have free samples available for your team. Click below to find out more about the products used in this project.
Related Articles
JebChem 1009M AQ – Mineral Oil Defoamer
JebChem 1009M AQ is a mineral oil defoamer, composed of mineral oil, metallic soap, silica, polyether and dispersant. JebChem 1009M AQ does not contain organopolysiloxane
Suitable for Water-based Coatings and Printing Inks. It has defoaming, anti-crater and pigment wetting properties.
JebChem 5440 – Gemini Surfactant
JebChem 5440 is a Gemini Surfactant with excellent substrate wetting properties (especially dynamic wetting properties).
Suitable for Water-based Coatings and Printing Inks. It has defoaming, anti-crater and pigment wetting properties.
JebChem 8740 AQ – Dispersing Agent
JebChem 8740 AQ is a Polymeric Dispersant for organic pigments in water-based coatings. It reduces mill base viscosity for better dispersion and allows high pigment loading. It is suitable for making water-based binder free pigment pastes and inks.