JebChem 7810 – Silica Matting Agent for TPA Solvent-based Industrial Coating
JebChem 7810
JebChem 7810 matting agent is an untreated, coarse particle-sized precipitated silica. JebChem 7810 is produced by an advanced chemical precipitation process. For use In paint and printing inks to produce a non-glossy surface together with a smooth touch.
Physical Characteristics *
Appearance | White powder |
Porosity | 1.9 g/ml |
Particle Size | 6.5 – 7.5 micron |
Whiteness | ≥ 93% |
Silica Content | ≥ 99% |
pH value in 5% dispersion | 7.0 – 9.0 |
* The values indicated in this publication describe typical properties and do not constitute specification limits.
Uses
Coil Coatings
Industrial Coatings
Application Guide Formula
Formula of Thermoplastic acrylic clear coat
![Table 1 Formula of Thermoplastic acrylic clear coat Table 1 Formula of Thermoplastic acrylic clear coat](https://jebchem.com/wp-content/uploads/2023/02/Table-1-Formula-of-Thermoplastic-acrylic-clear-coat-1.jpg)
Variation of Matting agent dosage: Gloss 20°
![Figure 1 Variation of Matting agent dosage Gloss 20 Figure 1 Variation of Matting agent dosage Gloss 20](https://jebchem.com/wp-content/uploads/2023/02/Figure-1-Variation-of-Matting-agent-dosage-Gloss-20-2.jpg)
Variation of Matting agent dosage: Gloss 60°
![Figure 2 Variation of Matting agent dosage Gloss 60 Figure 2 Variation of Matting agent dosage Gloss 60](https://jebchem.com/wp-content/uploads/2023/02/Figure-2-Variation-of-Matting-agent-dosage-Gloss-60-1.jpg)
Formula of Thermoplastic acrylic clear MATT
![Table 2 Formula of Thermoplastic acrylic clear MATT Table 2 Formula of Thermoplastic acrylic clear MATT](https://jebchem.com/wp-content/uploads/2023/02/Table-2-Formula-of-Thermoplastic-acrylic-clear-MATT.jpg)
Variation of Matting agent dosage: Viscosity
![Table 3 Variation of Matting agent dosage Viscosity Table 3 Variation of Matting agent dosage Viscosity](https://jebchem.com/wp-content/uploads/2023/02/Table-3-Variation-of-Matting-agent-dosage-Viscosity-1-300x177.jpg)
Variation of Matting agent dosage: Gloss 85°
![Figure 3 Variation of Matting agent dosage Gloss 85 Figure 3 Variation of Matting agent dosage Gloss 85](https://jebchem.com/wp-content/uploads/2023/02/Figure-3-Variation-of-Matting-agent-dosage-Gloss-85-1.jpg)
Conclusion
Gloss values decrease when dosage of matting agent increase. JebChem matting shows the same gloss level as competitor matting agent at 20º, 60º and 85º angles, see above figures. Hence, JebChem matting agent 7810 developed the same overall performance as COMP 810.
Related Articles
JebChem 1009M AQ – Mineral Oil Defoamer
JebChem 1009M AQ is a mineral oil defoamer, composed of mineral oil, metallic soap, silica, polyether and dispersant. JebChem 1009M AQ does not contain organopolysiloxane
Suitable for Water-based Coatings and Printing Inks. It has defoaming, anti-crater and pigment wetting properties.
JebChem 5440 – Gemini Surfactant
JebChem 5440 is a Gemini Surfactant with excellent substrate wetting properties (especially dynamic wetting properties).
Suitable for Water-based Coatings and Printing Inks. It has defoaming, anti-crater and pigment wetting properties.
JebChem 8740 AQ – Dispersing Agent
JebChem 8740 AQ is a Polymeric Dispersant for organic pigments in water-based coatings. It reduces mill base viscosity for better dispersion and allows high pigment loading. It is suitable for making water-based binder free pigment pastes and inks.