JebChem 1710AQ – Superior Defoamer for Waterborne Coatings
JebChem 1710AQ
JebChem 1710AQ is a superior polyether modified silicone defoamer for all low-to-high PVC architectural, industrial and printing waterborne coating formulations. It can also be used in waterborne UV-curable coatings. JebChem 1710AQ presents outstanding foam-knockdown performance without impairing gloss development. This additive can be applied in both mill-base and letdown process.
Physical Characteristics *
Appearance | Colourless viscous solution |
Density | 1.04 g/cm³ |
Active Content | 100% |
* The values indicated on this publication describe typical properties and do not constitute specification limits.
Uses
100% Polysiloxane, the superior defoamer for permium architectural paint
Outstanding defoam performance at very low dosage
Highly recommended for low PVC formulations
Suitable for architectural & general coatings and printing inks
Benefits
Rapid foam knockdown
Easy operation
Long term storage stability
No adversely affect on film appearance
Effective in variety of applications
Roller Test
![Picture4](https://jebchem.com/wp-content/uploads/2022/07/Picture4.jpg)
Roller test method which is applied for evaluation of foam by roller application. To intensify foam formation, a roller with extremely large pores is used.
JebChem 1710AQ shows the best performance of foam knockdown while JebChem 1805AQ is better than the competitors’ products.
Stir Test
![Picture5](https://jebchem.com/wp-content/uploads/2022/07/Picture5.jpg)
Performance Chart
![Picture6](https://jebchem.com/wp-content/uploads/2022/07/Picture6.jpg)
Conclusion
![Picture7](https://jebchem.com/wp-content/uploads/2022/07/Picture7.jpg)
Foam bubbles can already be present in the paint before application starts. Foam can also be introduced during the application process; especially during brushing and spraying, air can be brought into the paint. JebChem 1710AQ help formulators to develop a paint that loses its foam as soon as application has finished and film formation proceeds.
Related Articles
JebChem 1009M AQ – Mineral Oil Defoamer
JebChem 1009M AQ is a mineral oil defoamer, composed of mineral oil, metallic soap, silica, polyether and dispersant. JebChem 1009M AQ does not contain organopolysiloxane
Suitable for Water-based Coatings and Printing Inks. It has defoaming, anti-crater and pigment wetting properties.
JebChem 5440 – Gemini Surfactant
JebChem 5440 is a Gemini Surfactant with excellent substrate wetting properties (especially dynamic wetting properties).
Suitable for Water-based Coatings and Printing Inks. It has defoaming, anti-crater and pigment wetting properties.
JebChem 8740 AQ – Dispersing Agent
JebChem 8740 AQ is a Polymeric Dispersant for organic pigments in water-based coatings. It reduces mill base viscosity for better dispersion and allows high pigment loading. It is suitable for making water-based binder free pigment pastes and inks.